Lower arms eccentric bushings kit Fulvia – Teflon

Kit composed of four self-lubricating plastic bushings designed to alter and adjust front wheel camber on the Lancia Fulvia.

Adjustment is achieved by altering lower control arm length through the rotation of the eccentric-bore bushings using the supplied dedicated wrench. The maximum possible extension is 8 mm.

Settings can be adjusted with the control arms fitted, allowing immediate verification of camber variation. Secure positioning of the bushing is guaranteed by the lockrings and set screws supplied in the kit. All mounting hardware for installing the control arms is included in the kit.

ATTENTION: This kit provides a maximum shift of 8 mm, which alone is not enough to achieve negative front camber. The Lancia Fulvia 1.6 HF features upper control arms that are 8 mm shorter than standard and lower control arms that are 13 mm longer. Therefore, a total variation of approximately 20 mm is required to achieve negative camber (the exact measurement varies depending on whether you have 1st series tubular upper arms or 2nd series stamped steel arms). Consequently, this kit allows you to reduce positive front camber and, most importantly, adjust wheel alignment angles to ensure symmetry between the left and right sides.