Lower arms eccentric bushings kit Fulvia – in teflon

Kit consisting of four bushings built in self-lubricating plastic material to vary and adjust the camber of the front wheels of the Lancia Fulvia. The adjustment is made by varying the length of the lower arms by rotating the bushings with an eccentric hole. The adjustment is made with the arms mounted, being able to immediately check the variation of the camber. The locking in position of the bush is guaranteed by the ring nuts and grub screws supplied in the kit. All hardware for mounting the arms is included in the kit.

ATTENTION: With this kit, you can achieve a maximum adjustment of 8mm. This measurement is too small to achieve negative camber on the front wheels. It’s important to note that the Fulvia 1.6 HF has upper suspension arms that are 8mm shorter than the stock ones, and lower arms that are 13mm longer. So, in total, you need a variation of about 20mm to achieve negative camber (the measurement varies depending on whether you have the tube upper arms of the 1st series or the stamped sheet metal of the 2nd series). Therefore, with this kit, you can reduce the positive camber of the front wheels and, more importantly, adjust the wheel angles so that they are equal on the right and left